Видео

Danke, die ist schon seit 2014 am Start bei mir.

Thanx for your comment and great to see the QX21 in your videos in action!

@@grauoliv Thanks! I enjoy using this clunky old machine... :-)

Yeah it’s a cool little sequencer. I mean, super basic compared to my MC-500, but meant for different purposes. Question - how many synths do you normally sequence on it for a song? I find I can do 1 easily (of course), 2 is alright, but once you get to 3 or more, sequencing an entire song for all of them gets tricky.

@@krystianseibert6610 great question. I've connected 3 synths + a drum machine, no problems. Thre three synths were being sequenced by the QX21 (one of them doubling as cintrol keyboard) and the durm machime was just taking clock from it. If there is a secret, it might be to use a MIDI THRU box unstead of daisy-chaining the synths (I use a Banana Split). The other thing to note is ypu have to be careful how you set up the channels so you don't have feedback loops and other nastyness. I have Echo Back = ON on the sequencer and the master keyboard must be set up not to play from the keyboard, but only from the MIDI IN. Another thing I found is that many synths will automatically start their sequencers and I had to turn that off. With the Crave I had some problems when I tried to sequence in the QX21 transpositions of the onboard sequencer, but I haven't tried everything yet so I haven't given up...

@@telantas Thanks - that’s helpful. One more question - when you sequence multiple synths, do you lay down a full sequence for one synth first on the corresponding MIDI channel, and then do the second synth on another channel etc? Because with the second synth - if you do the sequencing bit by bit, you basically need to do it on Track 1 and then ‘Track Down’ so it merges with the first synth already recorded and on Track 2. Then you do the next bit, and again do Track Down. So unless I’m wrong, once you’re adding sequences for other synths (even if on different MIDI channels) the Insert and Chain functions aren’t that useful - because if you already have something on Track 2 (on a different MIDI channel for another synth), when you ‘Insert’ then it just replaces that completely. And ‘Chain’ goes to the end of Track 2, rather than the end of what you have on Track 2 for the synth you’re currently sequencing. Sorry - bit of complicated question, but not much around about the QX21!

¡y yo!

Er lebt noch!

No, not only the BS2. I started with the BS2, but when I recorded this, it was very much expanded. But I don't think that much fancy modules were involved with the music here.

@@grauoliv it sounds awesome im thinking starting wirh the bs2 but im torn apart between it or matrixbrute as it also can cover lots of 'weird' roads

@@raven-jz6cv That's a tuff decision. I like my modular for the experimental way. I don't even need keys to get a sound! You know what, I put a video together with sounds I made only with the BS2.

@@grauoliv yeah i feel you keys get me confused many times and the id of track from dark or dub turns into synthwave hahaha a modular i feel it will have me more restricted but with a lot of unmarked area to explore so the signals will be better. Can u control bs2 with the arturia beatstep pro?

@@raven-jz6cv The Beatstep Pro is a perfect partner to combine with a modular!

Hi, sorry for delay, I waited to look up the manual, which is at my studio. I couldn't find anything concerning the MIDI resolution, as of ppq, when you mean that. The smallest note you can enter is a 64th, so I would say, the resolution is 64 ppq.

Yep, I know, my SD card went out of memory ...

Hh yes! I just listened to the album Musik in September.

Can you possibly provide me a link to listen to all the stuff you have received? I am really curious what’s inside

Have a look here: www.discogs.com/Plastikman-Arkives-Promo-1993-2010/master/364214

I heard one say, there are no dumb questions! If you have one keyboard/synth in connection with the QX, you plug the QX OUT to the keyboard IN. Then the keyboard plays the programmed sequence. When you program the QX, you hear the keyboard direct on its own! What have you connected so far to the QX or another sequencer?

grauoliv running it to a Yamaha psr 36

So, then it should work the way I discribed it. Maybe it's turned LOCAL OFF. Pressing MIDI and Elec./Jazz Guitar should turn it on. Maybe the QX's ECHO BACK (Job C-4) is turned off! The good is, both manuals are available online from Yamaha!

Got it working. Thanks for the help. Needed new midicables. Next step learning to chain them properly. So will be watching this again

@@williambrown319 I got my qx22 hooked to a psr36 just lile you, see my last two videos. The psr36 has this great facility where you can set send and receive midi channels separately so you can record the psr36 part and then use the psr36 to control another synth while it still plays its part...

successfully uses

@@Music-ct6yh Tried, and succeeded epicly!

Tja, so ist das halt bei mir ... voll am Puls der Zeit! (-;

The MIDI solution with only those three would be DX21 Out -> QX21 In QX21 Out -> DX21 In DX21 Thru -> RX21 In That way, you can record in real time or step mode from the DX to the QX. And the RX should be tempo synced to the QX via the Thru.

grauoliv was thanks for the tip!

I have one more question and I’ll be out of your hair. How do you activate the jobs? I see that job c-4 is turned and I don’t know how to turn it back on.

For C and D jobs hit RESET & the C/D button.

I've been using this synth for a few months now (check my last few videos) and while I enjoy it a lot that's ome thing that it cannot do as far as I can tell: if you want to overdub, you need to rexord from the start. You don't erase what you recorded previously but you have to wait until the player gets to the point where you want to record sgsin, you cannot set "in" and "out" points for the overdub.

Each of the two tracks can playback all 16 MIDI channels at once. :-)

Thanks man,I've also discovered in the Manuel, that you can have 8 part multi-timbral from a multi-timbral synth as well. Do you know how many songs you can store in it's internal memory?

As there are 16 MIDI channels, you can hook up a 16 part multi timbral synth, for example the Access Virus. The memory of the QX 21 has in fact only one song, with two tracks.

So just to clarify, you can store up to one song that will support a full 16 or 8 part multi timbral song to the internal memory? Will the song still be in memory when you pull the plug out?

Yup & yup! :-) All data on the two tracks and the (third) internal track.

Machen wir! High five back! ruclips.net/video/zrrmvSroYgQ/видео.html

+instantknut Jau, war quasi auch meine erste "Filterbox"! :-D